What plug should i run? Stock cylinder with 195psi compression. Running 110 fuel. Wondering what best plug to run is?
195psi running on 110 fuel. What plug?
1992
1 - 17 of 17 Posts
Joined
·
2,413 Posts
I like the BR8EG... My compression is a little higher than that at 210 and I run straight VP 110 and that's the plug I use.. I'm sure others will have different opinions I'm curious to hear what other guys are using in high compression race gas setups...
Joined
·
103 Posts
I have 235psi in my 344 and run vp110 with a BR9EIX iridium plug
Joined
·
1,608 Posts
I run NGK BR8EIX on all my bikes. And I have between 175lbs-190lbsof compression
Joined
·
4,308 Posts
I always try to jet with a br9.plug and slipping has little to do with slipping and not reving in 5-6
Joined
·
539 Posts
You are correct Mike. It depends on the engine. I run an 8 in my 350 with 200lbs.
Joined
·
950 Posts
Joined
·
950 Posts
I run BR8ES ... burn great, NGK for me.
Joined
·
4,308 Posts
the lower the number the hotter the plug.a br8 is hotter than 9 and 7 hotter than 8.
Joined
·
4,308 Posts
you always try to run the coldest plug you can..if it got hot outside and my jetting was perfect I will sometimes switch to a 8 due to it running rich in hot temps.
Joined
·
539 Posts
My bad. A little dyslexia. ^_^
Joined
·
4,308 Posts
it happens fred.i get stuff twisted sometimes also.
Joined
·
103 Posts
Br9 is a colder plug than the br8. Big_Mike check your inbox please
1 - 17 of 17 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
