Went to remove my 88s pivot bolt and the dam thing is seized to the bearing collar. Ive tried everything to get it out and nothing. My last resort is to cut the bolt on either side of the swing arm to get the swing arm out then try and remove the bolt. Any suggestions before i do this?
Swing Arm Pivot Bolt SEIZED!!!!! How do i get it out?!
1 reading
gusdabus73
1 - 1 of 18 Posts
Joined
·
488 Posts
Another option for getting them out is to tap the hole thats in the bolt head. Run a bolt in there and bang on it with a slide hammer. There's no risk of mushrooming the threaded end. Anti-sieze is good, but I like doing what emullen just posted and adding a grease fitting and keeping it greased. If you tap the head end for a slide hammer bolt, just keep a bolt in there and put a zerk on the threaded end.
1 - 1 of 18 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
