over the past week or so ive been slowly getting my top end back together on my lrd 330 (with o rings in place of head gasket), i was testing uccr a couple days ago and the inner o ring seemed to have expanded sometime while i was putting the white grease on the cyldinder so i replaced it with an extra o ring and bolted the head down and filled with Marvel Mystery Oil to get a result, after i took the head back off the new o ring somehow came out of place and wasnt fitting in groove anymore, as if it got stretched out also, almost seems like contact with the white grease or mystery oil expanded them somehow. has any one ever came across this? or know what i did wrong, i dont want to have spend anothe 40$ on a gasket set
thanks
-louie
thanks
-louie
