Been getting some good help from several members here. Think it might be helpful for me to make my own thread and maybe cool to look back on one day and see where I started.
Bought this and afterwards realized the frame was junk. Its completely disassembled right now so of course I found things that should be fixed before re-assembly. Hopefully I can have it back going in a week or so. I've not even put a tank through this thing, but I can honestly say I know it from top to bottom and side to side. Everything is getting a good cleaning as well. Sand gets into everything!
MODS:
ESR 330 Trx9 porting
ESR 39mm PWK (185 main, CGJ 2nd clip, 48 pilot)
ESR airbox eliminator/intake, UNI filter
ESR Trx9B center mount pipe/silencer
CR250 ignition
ESR coil mount
ESR CR adaptor plate
VForce 3 block/reeds
AFCO big radiator w/AN connections
ESR water pump cover
ESR shifter and brake pedal
Lonestar +2+1 A arms w/ Moog upper/lower ball joints and NOS front calipers
Lonestar '86 swingarm 18.5" length
Lonestar Axcalibar axle
Lonestar billet sprocket hub
Lonestar forged carrier
Lonestar billet wheel hubs w/ Riptide rotors
Works triple rate front shocks
OEM rear (engraved CT Shaw?)
Maier plastics
Alba bumper
Alba nerfs
JL Engineering grab bar
Renthal 787's and clamps
ASV levers
ODI grips
Hiper CF1's 10x5, 10x10
Bought this and afterwards realized the frame was junk. Its completely disassembled right now so of course I found things that should be fixed before re-assembly. Hopefully I can have it back going in a week or so. I've not even put a tank through this thing, but I can honestly say I know it from top to bottom and side to side. Everything is getting a good cleaning as well. Sand gets into everything!
MODS:
ESR 330 Trx9 porting
ESR 39mm PWK (185 main, CGJ 2nd clip, 48 pilot)
ESR airbox eliminator/intake, UNI filter
ESR Trx9B center mount pipe/silencer
CR250 ignition
ESR coil mount
ESR CR adaptor plate
VForce 3 block/reeds
AFCO big radiator w/AN connections
ESR water pump cover
ESR shifter and brake pedal
Lonestar +2+1 A arms w/ Moog upper/lower ball joints and NOS front calipers
Lonestar '86 swingarm 18.5" length
Lonestar Axcalibar axle
Lonestar billet sprocket hub
Lonestar forged carrier
Lonestar billet wheel hubs w/ Riptide rotors
Works triple rate front shocks
OEM rear (engraved CT Shaw?)
Maier plastics
Alba bumper
Alba nerfs
JL Engineering grab bar
Renthal 787's and clamps
ASV levers
ODI grips
Hiper CF1's 10x5, 10x10


