So ill be picking up a 1985 atc with a complete 350 built esr engine.it runs on race gas ill be putting the complete engine into my trx.just need your guy's help on the wiring. Heres what ill be picking up.
![]()
New build
DANNYTRX
1 - 15 of 15 Posts
Joined
·
4,308 Posts
you caneither use the atc wiring,or just use a trx one with the different cdi.either will work fine.
Joined
·
1,325 Posts
That is a great deal for $1800. Even thoughthe trike has got obvious wear its worth more than $1800 so great pickup there man.
Joined
·
1,325 Posts
Do u know what type of swingarm it has on it.
Joined
·
123 Posts
I traded for a used two post lift and a brake lathe.im not sure on the swing arm. The bike is 5 hours from me i might pick it up tomorrow or the 16th.
Joined
·
1,608 Posts
I looked at atc as well but could not justify paying $1800 for it but good buy for you and go thru engine before you start.
Joined
·
348 Posts
nice, look forward to seeing the final product
Joined
·
123 Posts
Just got home after a 12 hour trip.will give you guys updates tomorrow or tuesday. But anyway started her up has a ton of compression..also looked under the reed block it has the trx11 port job.350 jug 5 mil crank with looks like a .250 spacer plate. He sent whole engine to eddie and got the whole engine back with carb and pipe to match..it just needs a little cleaning up. Cant wait to run it.
Joined
·
123 Posts
Did some looking in the atc..it has a 77mm stroke vforce 3 reeds 40mm carb.maybe an air striker..i rode it and what a difference from my 310..even tho this has the trx11 port job.it has tons of low end like a 4 stroke.but pulls like a sum beach up top. Power is smooth too.ill be putting the paddles back on and do a few runs uo the hill.
Joined
·
4,308 Posts
that's what nice about the bb motors bottomend torque.imo the 310 is basicly a stock bore with little gains over stock cylinder.
Joined
·
13,288 Posts
1 - 15 of 15 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
