Removing Sprocket Hub Snap Ring?

Lonewulf71 · Mar 28, 2013

I really need to get this sprocket hub off of here before I install my new motor. It's pretty worn. My husband and I have tried 3 different times to get this monster off of here. The snap ring is at least 3 times the size of the one on my 88 which I have never had trouble removing. We've tried everything we can thing of from specialized heavy duty snap ring pliers to the old hammer and screw driver. My concern is that we're going to mess up the splines on the axle trying to get the ring off.

Also does anyone know where I can get another snap ring if this one gets messed up?

Thanks, Aletha aka Breezy :lol:

TRX_hooty · Mar 29, 2013

Do you have the axle loose so you can move the hub away from the ring? From the picture it looks like there is pressure on the ring. Are you trying to take it off like it is in the picture?

Lonewulf71 · Mar 29, 2013

TRX_hooty said:
Do you have the axle loose so you can move the hub away from the ring? From the picture it looks like there is pressure on the ring. Are you trying to take it off like it is in the picture?

Hmmmm....now that you mention it, I'm not sure. I never had to loosen the axle with my 88 so we might not have loosened it. We're going to try to get it off of there again this weekend.

TRX_hooty · Mar 29, 2013

Ok, but if that hub has pressure on that ring it's not going to want to come out of the groove easy. Is it a durablue axle on your 88 too?

fearlessfred · Mar 29, 2013

I press the hub back just far enough to get a large flat screwdriver between the hub and snapring and use two screwdrivers to work it off

acecarlos · Mar 29, 2013

You need to press the hub away from the snap ring as suggested, then take a large set of sanp ring pliers and open the ring up and pull out.

Carlos

Lonewulf71 · Mar 29, 2013

Ok thanks everyone

The axle on my 88 is a Lonestar, I can take a pair of needle nose pliers and and get the snap ring off of it myself. However the snap ring on the 88 is maybe 1/3 as thick as the one on the Durablue.

acecarlos · Mar 29, 2013

Call me Aletha if you need assistance....we have taken a lot of these type axels apart.

Carlos

Lonewulf71 · Mar 29, 2013

acecarlos said:
Call me Aletha if you need assistance....we have taken a lot of these type axels apart.

Carlos

Thanks Carlos

Removing Sprocket Hub Snap Ring?

Lonewulf71

TRX_hooty

Lonewulf71

TRX_hooty

fearlessfred

acecarlos

Lonewulf71

acecarlos

Lonewulf71

Top Contributors this Month

Recommended Communities