joes6850's All Activity
-
-
YouTube Videos Good part starts around the 2:30 mark Ride to Memorial Hill Thanks for watching
-
Here are some pictures, not great ones though
-
-
joes6850 reacted to pro-fab's post in the thread I am new here and new to R's need lighting help with
Like.
In this abstract schematic you can see the factory setup on the left. The schematic on the right shows how I cut the ground wire and... -
joes6850 reacted to TRX1100F's post in the thread ((( wow - a real trx1100 build w/ cbr 1100 motor ))) with Like.
-
joes6850 reacted to shandad's post in the thread 1988 TRX250R dual sport long travel no link with Like.
First up grades... Should tie in with the colors I'm flyin' nicely. LED lights 200W floated ground Ricky Stator with...
-
There is always more could be done but I'm calling it done, for now....
-
joes6850 reacted to shandad's post in the thread 1988 TRX250R dual sport long travel no link with Like.
Ok enough for 1 day...
-
joes6850 commented on the thread ...*Rattle Can Rider*....Waiting for parts, got other stuff to do like steering stem. Used the All Balls bearing and seals, Found out my steer tube is bent...
-
-
joes6850 commented on the thread ...*Rattle Can Rider*....Puttin her back together, Got an issue with the counterbalancer bolts, the long one 110mm. I stripped it out, or finished stripping it...
-
-
joes6850 commented on the thread ...*Rattle Can Rider*....Here's the rattle can job, VHT case paint. I'll try it, time will tell about the durability. seems to have a nice satin finish.
-
-
joes6850 commented on the thread ...*Rattle Can Rider*....I've got some mechanical experience, but never actually split cases before, could not have done it without help from this site, namely...
-
-
joes6850 commented on the thread ...*Rattle Can Rider*....love the two part primer, I havn't sprayed anything in years and I like the quality of todays products. Once again, most guys are...
-
-
First rebuild for me here, started with a CL special...Pretty good to start with, paid too much but it came with extras and most of the...
-
-
joes6850 reacted to Apextrans's post in the thread First time out on the R after the winter resto!! with Like.
Well, finally got to ride the R since to rebuild. Went down to WV and rode the Hatfield & McCoy system. It was freakin' awesome...
-
joes6850 commented on the thread Bolt, flange (6x70)???????.Yes sir, thank you again Carlos.
-
Rebuilding (thread comming soon) 1989, schematic say 70mm, ones I think came out are measuring 75mm...
-
-
for those who have not seen it....
-
joes6850 commented on the thread which way does this bearing go?.my first one, taking forever..... will have a build thread soon, frame is all painted...
-
-
joes6850 commented on the thread which way does this bearing go?.Thank you, just in time, case is still hot!!! woo hoo
-
which way does the bearing with yellow seal go in the left case? the one that is only visible from one side?
-
-
joes6850 commented on the thread what is this?.Thank you
-
This little bearing came with my all balls motor kit. Don't remember removing one from the cases. can't find it in the manual...
-
-
Thanks for sharing. BRINGS A SMILE TO MY FACE!
