[DnB_racing]

one full harness and other race cut, with resistance readings
one 86ATC 250R,
and one with 12 volt dc lighting and battery, courtesy of Profab

 

[douglas]

will the electrons run in the other direction if i put the battery on the end of the circuit ?

 

[DnB_racing]

will the electrons run in the other direction if i put the battery on the end of the circuit ?

LOL...

AAAH let me think, NO!!!!

 

[acecarlos]

one full harness and other race cut, with resistance readings


View attachment 16385 View attachment 16386

Very nice Barry, will help those that need to track down electircals....

Carlos

 

[DnB_racing]

if anyone needs any different combinations, race cut, hid relay, kill switch with stock removed...
basically whatever combination anyone needs drawn up let me know, and ill draw it up and post it for all

 

[MudBug]

if anyone needs any different combinations, race cut, hid relay, kill switch with stock removed...
basically whatever combination anyone needs drawn up let me know, and ill draw it up and post it for all

Is there any chance you would like to do one for an 86 ATC?

 

[DnB_racing]

Is there any chance you would like to do one for an 86 ATC?

added 86 ATC 250r

 

[MudBug]

added 86 ATC 250r

Thank you!

 

[Piranha Performance]

Good info!! Thanks for posting it!!!!

 

[MudBug]

Quick Question. Can i use the Race cut diagram for my ATC? just making sure the wiring is the same minus conectors or what ever.

 

[DnB_racing]

Quick Question. Can i use the Race cut diagram for my ATC? just making sure the wiring is the same minus conectors or what ever.

yup!! what are you looking to keep in the end?

are you going to put a tether in? tell me what you plan on keeping and I can make up your exact harness schematic so you can print it out and put in with your paper work.. if you want??

 

[MudBug]

yup!! what are you looking to keep in the end?

are you going to put a tether in? tell me what you plan on keeping and I can make up your exact harness schematic so you can print it out and put in with your paper work.. if you want??

well i was planning on running as little as possible but I was talking with a buddy and i need to keep my head lights. so minimum +headlights please. and yes i do plan on putting in a tether.

 

[DnB_racing]

well i was planning on running as little as possible but I was talking with a buddy and i need to keep my head lights. so minimum +headlights please.

are you thinking of using a toggle switch? do you want the rear light? any kill or tether? give me what ever info you can so I can get it right

 

[MudBug]

are you thinking of using a toggle switch? do you want the rear light? any kill or tether? give me what ever info you can so I can get it right

not planning on any toggles at all, what could i use them for?. I currently dont have a rear light(or headlight) I'm looking for some and thinking about the proarmor tether setup.

 

[Apextrans]

Can I get an 86 setup with tether (which is already there) but I need to add in a headlight and taillight. On the tail light, I have a 450R lever and res with the brakelight switch. So when I pull the lever the tail light will light. Planning on a toggle switch for the headlight. I think I know how to wire it but if your offering... lol . Thanks!!

 

[DnB_racing]

ya no problem give me a couple days when I get a few minutes ill draw them up

 

[MudBug]

ya no problem give me a couple days when I get a few minutes ill draw them up

Thank you much!!!

 

[Apextrans]

ya no problem give me a couple days when I get a few minutes ill draw them up

Thanks you!!

 

[DnB_racing]

I just added a new schematic with 12 volt DC lighting with battery and isolated ground....

CAUTION:: ground must be completely isolated from the rest of the system, notice on schematic grounds are not attached to the AC ground

 

[MichaelKelley]

Well done budy, I need some different combination and i m trying that but didn't get success. Have you tried different types of combination along with this?