Honda TRX250R Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
Howdy Folks,
Rebuilding a stock rear showa shock on my 86 for TT and flattrack, wondering what length springs you guys are using? I know on my motorcycles I run flattrack on I drop the spring overall length a few inches. I have already setup the valving and stuff, and need to cut a lowering spacer, just wondering if anyone remembers offhand their spring length if its shorter than stock (I assume).
 

·
Registered
Joined
·
7 Posts
Howdy Folks,
Rebuilding a stock rear showa shock on my 86 for TT and flattrack, wondering what length springs you guys are using? I know on my motorcycles I run flattrack on I drop the spring overall length a few inches. I have already setup the valving and stuff, and need to cut a lowering spacer, just wondering if anyone remembers offhand their spring length if its shorter than stock (I assume).
Really depends on how much you're going to shorten the shock, but... A 9" long spring with a 2.25" ID usually works
 
1 - 2 of 2 Posts
Top