Honda TRX250R Forums banner
1 - 1 of 1 Posts

· Registered
13 Posts
Discussion Starter · #1 ·
i have the ESR reeds with built in spacer and im having a bit of a hard time mounting my carb to the air boot. when the carb is on the rubber boot built into the reed cage, my carburetor is facing towards the frame and in order to get the air boot on the carb, im going to have to pull the boot from the reed cage to the right to get the carb away from the frame. will it be ok to have stress on that intake boot or will it tear?
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.