Honda TRX250R Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Changed the counterbalance bearing on the back end of the pulse generator. When I put it back together I accidentally bent the pulse generator and it is now touching the flywheel magnetic pickup. I need to know what gap I need to bend it back to. Cant find anything in the manual about the gap. Any help would be greatly appreciated!
 

·
Banned
Joined
·
489 Posts
I checked the one I have on the bench and it was at a snug .013 and the cr ign.thats on the bike was the same.I checked with a flat feeler guage so the accuracy may not be that great .carlos will probably know for sure
 

·
Premium Member
Joined
·
13,280 Posts
It will work with just about any gap from .001" (as close as possible, yet not touching) to .025" and maybe a bit more. Specs call out for .25MM to .50MM or .010" to .020"...Fred's is right on the money at .013". Carlos
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #6 ·
Alright. Thanks everyone for the replies! They really helped. This was my first post as you can see and I am very happy and surprised with how fast people responded. You guys rock! Thanks again!
 
1 - 6 of 6 Posts
Top