Honda TRX250R Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
190 Posts
watch out when replacing bearings i.e. swingarm, use honda's bearings pivotworks replacement kits are the wrong size at pivot bolt and bearing seals at the carrier are 52mm should be 50mm
can say that i've ever ran into that with the pivot bearings but, on one occasion had a guy hand me the wrong seals for a carrier.
 

·
Registered
Joined
·
3,565 Posts
*& if ya which ones ,. other honda model parts work on the trx250R
 

·
Registered
Joined
·
2,042 Posts
watch out when replacing bearings i.e. swingarm, use honda's bearings pivotworks replacement kits are the wrong size at pivot bolt and bearing seals at the carrier are 52mm should be 50mm
What do you mean about wrong size at the pivot bolt? Could you explain further?
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top