Honda TRX250R Forums banner
1 - 12 of 12 Posts

· Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
hi all, i just moved here to michigan about a month ago, and i was wondering if there were any fellow 250 guys around me. im in highland, on the border of white lake, i have 12 acres, but there are 140 behind me that are all trails, anyone close?
 

· Super Moderator
Joined
·
858 Posts
Welcome! Did you move to MI for a job? Because that's about the opposite for most people :rolleyes: , haha. Anyway, I'm from Elsie, MI, which is about an hour and a half from you. We've got ~72 acres of woods/fields with trails throughout, but you can basically ride all over the area. I also frequent Silver Lake in the summers, which is about 2 and a half hours from me, so probably more like 4 for you. I'm always up for riding in new areas, because our trails in our 72 acres start to seem real small when you've ridden through them a million times.
 

· Banned
Joined
·
1,209 Posts
[attachment=276:Imported...os_00154.JPG][attachment=276:Imported...os_00154.JPG] im from pt huron 40 min north of detroit nothing good to ride up here closed everything good down there are some sod drags that pull alot of people out mainly go to silver lake or trail riding up north mio grayling or gladwin
Welcome! Did you move to MI for a job? Because that's about the opposite for most people :rolleyes: , haha. Anyway, I'm from Elsie, MI, which is about an hour and a half from you. We've got ~72 acres of woods/fields with trails throughout, but you can basically ride all over the area. I also frequent Silver Lake in the summers, which is about 2 and a half hours from me, so probably more like 4 for you. I'm always up for riding in new areas, because our trails in our 72 acres start to seem real small when you've ridden through them a million times.
 

· Banned
Joined
·
1,209 Posts
im heading to robert rb tomorrow to pick up my engines, pt huron its at the motor cycle club www.phmc-usa.org 2 stroke class 200-500 cc mainly 250r s or a few stock shees there supose to be getting a light set up this year prior years it was only the rubber band start surgical cord. its off of griswold by the tsc kmart sams club. used to go to albright sand drags but the kinda got price for how long your there how many r s do you have ?
Port Huron, huh? Well I'm from Memphis, it's right down the road. I go over near Elsie all the time too as Bob at RB Racing builds all my engines.
 

· Registered
Joined
·
960 Posts
I have a full Roll Design Lobo 250R. Bob has the engine to that one right now. That's my mx bike. Then I have a stock framed 250R. It's kind of my dune/drag bike. Bob built the engine to that one, too. Then I have a Arens frame, Houser long travel project 250R. I'm sure the engine will be over to Bob before too long. I also have a couple small Honda trikes.
 

· Banned
Joined
·
1,209 Posts
yeah i mentioned you sat but i didnt have your name he couldnt think you ya did you live over by him ? he is a great guy good work !
I have a full Roll Design Lobo 250R. Bob has the engine to that one right now. That's my mx bike. Then I have a stock framed 250R. It's kind of my dune/drag bike. Bob built the engine to that one, too. Then I have a Arens frame, Houser long travel project 250R. I'm sure the engine will be over to Bob before too long. I also have a couple small Honda trikes.
 

· Banned
Joined
·
1,209 Posts
i might go for saturday theres the sod drags in pt huron that sunday ill be back for that
My name's Tim. Mention me next time you talk to him. I live in Memphis. You going to Silver Lake with E2S in May?
 

· Registered
Joined
·
23 Posts
hi all, i just moved here to michigan about a month ago, and i was wondering if there were any fellow 250 guys around me. im in highland, on the border of white lake, i have 12 acres, but there are 140 behind me that are all trails, anyone close?
Im from Traverse City but living down state right now untill about June. Right now i am about 20 mins south of coldwater
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top