Honda TRX250R Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
I’m not Familiar with the bushings in the a arms or swing arm. I would like to install new bushings some of the front a arm bushings have a little tiny bit of slop in them. Can anyone help me, Where can I find a good set that won’t break the bank.? I’m also looking for a anti vibe lock nut just a nice locknut that isn’t 200+ dollars.
 

·
Registered
Joined
·
287 Posts
As far as lock nuts go, you should be able to find what you need at an ace hardware or wilco farm store. I get all my metric hardware at my local wilco farm store. They have a great selection.
I also just ordered bushings for my 86 swingarm and Aarms from a guy on Ebay. They are delrin and fit perfectly. I believe that I paid $90 for the Aarm bushings and $40 for the swingarm. P&R machine is the company that machines them. You can also buy delrin rod for $20 per foot roughly on Amazon and machine them yourself if you have access to a lathe. I usually do that unless I don't have time.
Loren
 
1 - 3 of 3 Posts
Top