[dvickroy]

Is there a kit you can buy anywhere? I see R's with dual hedlights all the time.
I can't figure it out- I have a stock frame so the round mounts won't work will they?

 

[BLACKeR]

probably the easiest ones to mount are the bar mounted ones. i had some trail tech lights that mounted on the bars, real easy to set up. the fact that there are two lights doesnt matter. you only need the one power wire.

 

[dunemobbster]

i got a used set of bar mount lazerlights i'll sell ya. pm me if you're interested.

Is there a kit you can buy anywhere? I see R's with dual hedlights all the time.
I can't figure it out- I have a stock frame so the round mounts won't work will they?

 

[lilredridenwood]

I made a bracket that bolts to the stud above the shock, I have fullbore plastic so that stud was not being used.

 

[dvickroy]

Ridenwood- can you send me a pic of that bracket and what the quad looks like- I need some help on this one.

You talking about the stud that sticks up right above the shock?

What did you make the bracket out of?

I'd really appreciate it- my e mail is [email protected]

Thanks!

 

[lilredridenwood]

Ridenwood- can you send me a pic of that bracket and what the quad looks like- I need some help on this one.

You talking about the stud that sticks up right above the shock?

What did you make the bracket out of?

I'd really appreciate it- my e mail is [email protected]

Thanks!

sorry my modem shot craps and I havent been on in a few days. Im at work so I cant send a pic. I made amy bracket out of two washers with a spacer in between, weldede it together and then ground it down. Then I made an L bracket with a hole to bolt it to that stud you are talking about. I redid my R this winter and cut the bracket all up removed the stud and welded it straight to the frame. when I get the puter back up and running i will send a picture. Hope this helps.

 

[voelker]

I drilled a hole in each of the mounts for my fullbores.