Honda TRX250R Forums banner
1 - 5 of 5 Posts

· Registered
27 Posts
Discussion Starter · #1 ·
Here's the short of it:

STock 88 trx

Bought an LRD pipe and silencer
RAD Valve
Going to remove the air box lid
Elevation 800'
Temp will be 60-80 F

Really interested in a safe starting point for the main, but if you have $.02 on anything else I'm all ears!

P.S. Third time trying to post this, it keeps getting more concise, though!! (need to try Mozilla!!!!!)

· Registered
960 Posts
If it has a stock carb I'd try:

-air screw 1.5 turns out
-stock pilot
-needle in the middle groove
-160 main

And go from there to fine tune it. A 160 main might be a size or two too rich but it's better to start rich and go down from there. Keep us posted.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.