Honda TRX250R Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
209 Posts
Both of mine broke and I just welded a washer around the bolt hole after welding the cracks up. They have held up to hard mx racing just fine and I dont run a headstay. If you want to drop them in a padded envelope and mail them to me I will weld them for free and mail em back.
Also check your lower motor mount bolt under the motor. My front mounts broke because that lower mount bolt came loose.
 

· Registered
Joined
·
21 Posts
Discussion Starter · #3 ·
my bottom ones broke too, i welded them without fixing the front ones thinking that would be good enough and they broke again as soon as i kick started it. im not a very good welder though. i was gunna weld all of them but i didnt have time and had to go riding in the morning. i dont run a headstay either.

so this time im gunna weld the bottom ones again and get new front ones and that should hold. i should be able to get some front ones for cheap, i know ive seen them go on ebay for like 10 bucks in the past but i didnt need them then. if i cant find any i will take you up on that generous offer, thats pretty cool of you. thanks
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top