Honda TRX250R Forums banner

1 - 11 of 11 Posts

·
Registered
Joined
·
1,058 Posts
Discussion Starter #1
I've seen a lot of 250R cases that were 100% good shape except for damaged case saver mounting holes. Since God will send you straight to Hell for not running a case saver on the quad he designed, what do you guys do in a situation like that?
 

·
Registered
Joined
·
3,565 Posts
if the mounts (ONLY) are busted off & case is good
there is a fix ..sorta ..
well I have seen it done anyways ..
I knew someone who ground offthe remaining material flush to the case,then he cut out sections of the inner clutch hub where the bolts hold the clutch springs & welded them in the correct loaction to be able to mount a case saver ..
 

·
Registered
Joined
·
1,058 Posts
Discussion Starter #3
My 250R was an eBay special (read: POS) and the case saver mounting holes were busted. I was able to use a Dremel and very carefully cut the damaged area off. I then installed spacers and mounted up a Noss Machine case saver (best on the market IMHO). I'll try to attach some pics tomorrow.
 

·
Registered
Joined
·
42 Posts
usually it the top mount that breaks off. in that case a case saver like i have on my engine will still work great. it mounts on the top and the shifter shaft.

 

·
Registered
Joined
·
214 Posts
i dont like them i had one brake on me bc my motor ripd out of the frame on the front an ido the chain broke to so yeah i hate that motor its not in a bike but its fasted as hell i dont know whats in it but yeah
 

·
Registered
Joined
·
161 Posts
i dont like them. i had one break on me because my motor ripped out of the frame on the front and the chain broke too. so yeah i hate that motor, its not in a bike, but its fast as hell. i dont know whats in it though.

did my best.

i like my nacs case saver, i just cant imagine what kind of abuse id have to do to break a chain violently. i don't wish to experience it

-Brett-
 

·
Registered
Joined
·
42 Posts
the one time i broke my chain violently is when i was in the snow spinning the tires in 5th or 6th and i was only moving like 5mph and suddenly got great traction. the chain was kinda worn and when it let loose it bunched up between the sprocket and the case, breaking the part of the case where the shifter shaft comes out.
 

·
Registered
Joined
·
128 Posts
i,ve been running a case saver ever since a broke chain destroied my little brothers mojave cases. the worst part was the amount of backwoods engineering to put it back together, just to sell itfor pennys on the dollar.
 
1 - 11 of 11 Posts
Top