Honda TRX250R Forums banner

21 - 27 of 27 Posts

·
Registered
Joined
·
515 Posts
I ran the 420 gram weight on my race trike & loved it! It allowed the motor to lug around the tight corners without stalling & a quick stab of the throttle allowed the motor to still accelerate faster than stock. If your not planning on riding at slower speeds for any reason then don't bother with the weight is my opinion. For a duner or drag motor I would stick with the stock CR set up.
 

·
Registered
Joined
·
12,886 Posts
Burns, what weight do you run? What is the biggest you can run w/o a spacer?
Depends on the year of the CR250R IGN...the 2002 to 2007 Flywheels are taller and a different design than prior years like 2000 or 2001, therefore; the Flywheel design & added weight is different. We have done all the different years for the CR250R IGN and have determined the correct flywheel design & weight for each year.

Carlos
 

·
Registered
Joined
·
12,886 Posts
The picture on the Left shows the 2001 vs 2007 Flywheel. Second and third picture shows the 2001 and 2007 balanced. Note the 2002 to 2007 Flywheels look the same externally, and work for all years from 2002 to 2007, however they are different internally. Our custom Flywheel weights are specific to each year IGN from 2001 to 2007, and specific to the engine CC size, application and level of rider.

As an example, an OEM Ported cylinder vs a 370CC Sphynx vs a Puma vs a Saber all utilize different weighted flywheels for optimun performance and reliability.

20140619_102955.jpg 20140619_103056.jpg 20140619_103033.jpg

Our weighted flywheels are also coated with a conductive coating to promote magnetic field stabilization and prevent rust.

Carlos
 

·
Registered
Joined
·
12,886 Posts
BDT Racing 'HYBRID' 2002/2007 CR250R IGN all New Honda OEM components, plus BDT Billet Stator adapter plate, BDT Billet Coil Mount, and all needed hardware in Stock at BDT Motorsports. These are complete CR250R IGN's for the TRX/ATC250R 85-89..."Plug and Play", no modifications needed.

BDT is the ONLY source that currently stocks full HYBRID' 2002/2007 CR250R IGN's for the TRX/ATC250R 85-89.

Carlos
 

·
Registered
Joined
·
79 Posts
BDT Racing 'HYBRID' 2002/2007 CR250R IGN all New Honda OEM components, plus BDT Billet Stator adapter plate, BDT Billet Coil Mount, and all needed hardware in Stock at BDT Motorsports. These are complete CR250R IGN's for the TRX/ATC250R 85-89..."Plug and Play", no modifications needed. BDT is the ONLY source that currently stocks full HYBRID' 2002/2007 CR250R IGN's for the TRX/ATC250R 85-89. Carlos
Carlos, I recently browsed through your website looking for this but couldn't find anything on ignition. Did I miss it? How about a link or pricing info?
 

·
Registered
Joined
·
12,886 Posts
tosaw:

We don't list everything we stock or sell, services included....just to busy to keep up with all the demand.

Please call BDT 909-466-9152 M-F 10-3, Saturday 10-2 for questions or to place an order. The price of the Honda OEM HYBRID' 2002/2007 CR250R IGN's complete 'plug and play' for the TRX/ATC250R 85-89 is $849.99

Carlos
 
21 - 27 of 27 Posts
Top