Honda TRX250R Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
127 Posts
Discussion Starter · #1 ·
I installed new oem plates and used oem basket that’s like new because my basket is grooved bad. I installed the Neil’s mod parts and the space between the outer plate and top hat piece with ball in it after all assembled was too far from each other and clutch wouldn’t actuate. I took it apart and checked the clutch rod, ball and clutch arm and all are in good shape. I took the 400ex plate out and put an R plate back in and original springs w/o extra washers and it was still a little too far away. I added the only washer I had with correct diameter so it wouldn’t shift around when clutch wasn’t engaged and it works good now but there almost 0 clutch arm movement. I haven’t ridden it yet so no idea how it works now. Only reason I replaced it all was last time I had the cover off I noticed the basket was grooved. Clutch looks to operating correctly when I pull the lever and cable but not sure if having no arm free play will hurt anything.
 
1 - 1 of 1 Posts
Top