Honda TRX250R Forums banner

CK-109 Hot Rods Crank loose fit

266 Views 3 Replies 4 Participants Last post by  Mr Scary
After splitting my cases to check the crank/bottom end, I found that the crank will slide right into the case/crank bearing with little effort and will also slide right out as well. I am thinking that this is a sign of major wear on either the crank and or bearing or both?

Guidance greatly appreciated.

Automotive tire Gas Rim Machine Automotive wheel system
Automotive tire Bicycle part Rim Gas Plumbing
Gas Nickel Engineering Automotive wheel system Machine
Tire Wheel Automotive tire Alloy wheel Motor vehicle
Automotive tire Motor vehicle Automotive design Rim Alloy wheel
See less See more
1 - 1 of 4 Posts
Only way to know for sure is to mic them. Since you have split the cases I would suggest replacing the bearings.
  • Like
Reactions: 1
1 - 1 of 4 Posts