Honda TRX250R Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
940 Posts
Discussion Starter #1
Transmission had a gear failure and this is the result. They are Yukon gears, and I'm curious if they are now paper weights?








 

·
Registered
Joined
·
12,874 Posts
They have a lot of damage, quite a few burs...I would not use them for a high powered engine, however; if you take a fine stone and remove all the burrs, and raised edges, they should be fine for a stock or semi-stock engine. My only other concern would be 'micro cracks' or 'stress cracks' not visiable to the naked eye. Best way to check is with a dye penetrant or magnuflux to expose any micro fractures.

Carlos
 

·
Super Moderator
Joined
·
4,273 Posts
Goodson Tools, offers that dye checking set up mentioned. Spray on, let it soak a few & put the light on it & your done, unless you find a crack.
Neil
 
1 - 3 of 3 Posts
Top