Honda TRX250R Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2,042 Posts
Discussion Starter · #1 ·
Which aftermarket seat latch do you guys like the best. I've been using the stock latch but I'm getting a new seat that has the stock pins cut off. I thought the Lonestar one looked cool. Quick and easy to remove. It's a bit expensive though.
 

·
Registered
Joined
·
491 Posts
I am and have been using the Lonestar units for years without any problems except some slight rubbing on the frame from the latch pin. The downside to this durability is its weight as it is made of steel and is quite heavy as compared to an OMF unit. I have a spare RPM latch that I keep and it is an exact copy of the Lsr one.
 

·
Registered
Joined
·
413 Posts
the one i had i really liked, i dont know who made it but the seat pins had grooves cut in them and there were two aluminum plates with a spring in between them. in the plates there was a slot. the slot fit into the grooves and the spring held them tight. it was a very snug fit and very easy to use.
 

·
Registered
Joined
·
2,042 Posts
Discussion Starter · #4 ·
I think that is one of the OMF styles. They have a standard and a quick release.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top