Honda TRX250R Forums banner

1 - 20 of 22 Posts

·
Super Moderator
Joined
·
2,303 Posts
Discussion Starter #1
I know this has been discussed and asked before but what are my options for aftermarket billet pegs for the 86’? Options, pics, opinions appreciated! Thank you and Happy Holidays everyone!!!

I do not want nerf bars, I’ve owned my R since 1989 and I never ran nerf bars and don’t ever intend to...
 

·
Super Moderator
Joined
·
2,303 Posts
Discussion Starter #4
Hey Mike check out the ones I make, Wicked Metal Designs LLC $ 135 a pair shipped ( Within the U.S. )
I'll try to get some pics posted
That’s exactly what I am looking for! Are they aluminum or steel? Powder coated or painted?
 

·
Super Moderator
Joined
·
2,303 Posts
Discussion Starter #6
Thanks Doug! So the other option is an adapter, mount the adapter to the frame then I can run a 450R style peg (mounting the 450R peg to the adapter)??? Who makes those adapters, where, how much?
 

·
Registered
Joined
·
417 Posts
What’s up mike...You can also use the 88/89 roll design pegs if you can’t find 86 style ..They Mount right up they just change the position slightly..
 

·
Super Moderator
Joined
·
2,303 Posts
Discussion Starter #8
Happy Holidays Steve! My wife was just asking me about you and your wife we’d love to get together!

OK lemme see if I understand, so an 88-89 roll design peg will bolt up to the stock 86’ frame??
 

·
Registered
Joined
·
417 Posts
Yes. I have a loose set if you want to see if you like the fit,mine aren’t for sale but you can mock them up if you’d like..
 

·
Registered
Joined
·
885 Posts
An 88/89 on 86/87 would be horrible placement
86/87 on 88/89 is what u would want

yes peg peg would be really high and forward, kinda opposite than what want
 

·
Registered
Joined
·
2,926 Posts
Thanks Doug! So the other option is an adapter, mount the adapter to the frame then I can run a 450R style peg (mounting the 450R peg to the adapter)??? Who makes those adapters, where, how much?
.org Tony Pumashine. he makes the adapters steel or stainless. i made my own and polished them.
 

·
Registered
Joined
·
287 Posts



I know a guy that fabricates these from either A36 steel or 304 stainless steel. Let me know if you are interested.
 

·
Super Moderator
Joined
·
2,303 Posts
Discussion Starter #17
I’m 6’-1” so the the further down and back would be optimal for me!!
 

·
Registered
Joined
·
13,056 Posts
81230036_10217680276612820_4738458575238594560_n3.jpg
I know this has been discussed and asked before but what are my options for aftermarket billet pegs for the 86’? Options, pics, opinions appreciated! Thank you and Happy Holidays everyone!!!

I do not want nerf bars, I’ve owned my R since 1989 and I never ran nerf bars and don’t ever intend to...
Mike:

The 'Best' Footpegs available are back in stock at BDT. Just couldn't keep them in stock fast enough the past 12 months. Now we ran a extremely large batch, in Anodized Black, Red, Blue and Billet...for all models of 85-86 ATC250R, and 86-87 TRX250R and 88-89 TRX250R.

Plus for 81-84 ATC250R, ATC200x, ATC350x, YFZ450R, TRX450R, LTR450R, Banshee, and Raptor....

Carlos 33672235_10213669493905759_4808348971728633856_n.jpg
 

·
Registered
Joined
·
13,056 Posts
NEW BDT Billet Pegs for all ATC250R's 81-84, 85-86 and TRX250R 86-87 & 88-89.

Available in Anodized Red, Blue, Black and Natural Billet. They come with 3 sets of Stainless Steel (SS) cleats (#1-5/16” installed) and 50 additional cleats of each #2-3/8”& #3-7/16” that are fully adjustable allowing Boot Camber to be varied from Front, Middle or Back.


You can also adjust cleat heights to increase or decrease boot engagement or aggressiveness to pegs. A BDT Safety Feature is the Full Radius Nose or FootPeg end, Unlike Steel Pegs with Sharp end corners that can dig into your boot or leg in the event of a fall.


They are 1.6 lbs per set lighter than similar aftermarket Steel FootPegs, 22% wider, 1/2” longer, and available in standard Stock Height and Lowered -5/8” & Set Back -1” for TT or Flat Track. Made from the finest Aluminum Aircraft Grade 7075-T6, they are equally Strong to any current aftermarket Steel Pegs.


The BDT Billet Pegs come with all mounting bolts, 3 sets of Cleats, 2 Allen Wrenches, Loctite and full instructions.
100% MADE IN THE USA



Additionally BDT Billet Pegs are also available for First Generation 81-84 ATC250R, and all 2 & 4 Stroke Quads.

Yamaha
Kawasaki
Susuki


BDT is very proud to bring to the 250R community the Finest FootPeg sets available . “Simply The Best”....


Carlos

81568495_10217680275972804_8911895042839281664_n2.jpg 33813081_10213669496105814_1907056429651460096_n1.jpg
 
1 - 20 of 22 Posts
Top