Honda TRX250R Forums banner

1 - 12 of 12 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
450r spindes just tired of my old ones in good shape. lots of stock 450r stuff out there now i'm thinking hubs work not sure on spindels anyone know
 

·
Registered
Joined
·
2,042 Posts
I think rebelbanshee or one of the other members had complete 450R spindles, brakes, and hubs on his R.
 

·
Registered
Joined
·
2,042 Posts
I'm using 400ex spindles and hubs with walsh brake adapters. Darn adapters are expensive though.
 

·
Banned
Joined
·
1,209 Posts
im running the spindle and hub no brakes its on a drag bike stock tie rods will work but they are streched right out 450 ite rods are way to long nice n light though tired my r hubs and the bearings are differant to the shaft design of the 450 good cheap upgrade
450R spindles work, but you have to use the 450R spindles, and hubs. its a very nice set up though.
 

·
Registered
Joined
·
3,565 Posts
anyone ever compare the turning radias's ?
 

·
Banned
Joined
·
1,209 Posts
theres a 07 set of spindles hubs rotors 4 sale 50.00 its on exriders.com under honda stuff 4 sale and as far as the turing rad it seems a little tighter
anyone ever compare the turning radias's ?
 

·
Registered
Joined
·
3,565 Posts
seems likely since the arm from spindle is shorter on 450R ...a tighter turning radius is not always the most desirable tho ;) a small difference should be alright tho ..not a large
 

·
Registered
Joined
·
14 Posts
hey there

what does using the 04/05 450r spindles do to the geometery of the 250r front end?

obviously all front ends available for the 250 are gonna be designed around the oem spindles/hubs, wont using something else throw the geometery off?

can you buy new brake calipers for the 250r? such as brembo etc? or can you buy adaptors to fit 450r etc calipers to 250r spindles?

thanks, mark
 
1 - 12 of 12 Posts
Top