[ky250r]

I have a pair of honda 250r swingarms for sale, with an aluminum skidplate included.

the silver swingarm is a stock 86 that I bought but never did end up using. it has no needle pivoit bearings but the insides are very clean ready for installation of a new bearing kit. the skid plate is a used UM aluminum skidplate that will also work on the yellow swingarm.

the yellow swingarm is somewhat of a custom deal, but I dont the exact details of it. Im thinking that is was a stock 86-87 swingarm that was shortened to a 88-89 length and a different carrier tube was used. the carrier tube on this swingarm has a bigger diameter then the stock silver swingarm. same size though as the 88-89 aluminum swingarm carrier tubes. it has yellow powdercoat but is chipped and flaked pretty bad as you can see in the pics, and also pretty dirty. but it has new pivoit works needle bearings I installed myself. and this swingarm does have several weld repairs that I made myself and have used the swingarm after the repairs and they are still holding up. probably a good idea to do with this arm would be to remove all the powdercoating and clean and reweld some of the joints to strengthen it and then have it powdercoated to your prefered color. I have used this swingarm quite a bit and it works awesome for trails and tight technical riding because of the shorter length.

Im wanting to sell all thats pictured for 110$ shipped, but will also consider offers

heres the pics,

http://forums.everything2stroke.com/attach...pg?d=1203019713
http://forums.everything2stroke.com/attach...pg?d=1203019713
http://forums.everything2stroke.com/attach...pg?d=1203019713
http://forums.everything2stroke.com/attach...pg?d=1203019713
http://forums.everything2stroke.com/attach...pg?d=1203019736

 

[ky250r]

bump! somebody make me a offer on just one or both of the swingarms. need em gone, they are just taking up space.........100$ shipped

 

[2R's]

the yellow is a stock trx250R 86/87 shortened or repaired ,.hard to tell exactly from pic
the other is a stock ATC not TRX ....note 2nd pic of swingarms ,..shows this 1 with stub for brake stay is in different location then TRX & has threads ..this is probably the reason for the different carrier size

 

[86 Quad R]

the other is a stock ATC not TRX ....note 2nd pic of swingarms ,..shows this 1 with stub for brake stay is in different location then TRX & has threads ..this is probably the reason for the different carrier size

yuppers. en if i had to guess its an '85 cause the '86 atc has same carriers as trx's.

 

[2R's]

correcto mundo ! ...85 had the small one !.......

 

[ky250r]

correcto mundo ! ...85 had the small one !.......

ok thanks guys for clearing that up for me. so the grey/oem swingarm is a stock 85' atc swingarm??? I actually bought that swingarm to use on my 250r, but when it came time to put my axle carrier in........uh oh things just didnt fit up? so I had to go back with the yellow swingarm for a little while untill I switched to a 88-89 aluminum swingarm that im currently using.

 

[Evan9r]

how much for just the yellow one shipped to 27541?

 

[ky250r]

how much for just the yellow one shipped to 27541?

would 50$ shipped sound good? your in north carolina, right?