Honda TRX250R Forums banner

trx250r

  1. 86 trx250r flywheel

    Engine and Transmission
    Hi guys and gals, first post but in desperate need of help. Bought a 86 250r got it running really good till i heard a rattle in bottom end... flywheel came apart... yes CAME APART! So i bought what i thought was the same flywheel but when it came in, i noticed the rivets are wrong. Just need...
  2. Laeger Frame TRX250R/ 265cc For Sale

    For Sale
    For Sale: Immaculate 250R built from the ground up. It started as a basically stock 1988, then I built this as a project in 2009. I rode it occasionally for about a year after that, never raced. I am posting to see what kind of interest there is and am accepting offers. I don't need to sell...
  3. 1986 trx250r motor trouble

    Lounge
    Hey everybody, I have 2 separate 86 trx250r motors that I'm having the same exact issue with and need ur help. I split the cases on both motors and replaced the crank bearings and crank seals on both with all new gaskets and piston and rings. After the motors were all back together and in the...
  4. 1988 TRX250R, ESR 330, lots of aftermarket parts. Kansas

    For Sale
    SOLD Up for sale is a 1988 Honda TRX250R. *ESR 330 top end kit including pipe, carb, air filter etc. Unreal power. Changable dome in head but race fuel in there now. *Lone Star A-Arms. *PEP Shocks. *New Seat Foam and Jet Trim cover *Factory plastic (trimmed front) one small repair on rear...
  5. Need help with jetting issues 330PV ESR

    Lounge
    I have recently purchased ESR's 330PV kit for my R. I was set a 38mm carb. Jug has a mid port. I was sent a few different jets. I need to know what size main jet to use and needle position. Any thoughts or information would be helpful. Thanks
  6. Frame

    Suspension, Chassis, and Braking
    Hello everyone, I am in need of an 88-89 frame. Used is ok, but can't have any current or repaired cracks. The frame i currently have in my bike was cracked and repaired incorrectly sometime before I purchased the bike. The frame cracks in a new location almost every time I ride it. Does anyone...
  7. duncan pc2000 340pv motor? HELP

    Engine and Transmission
    Hello everyone! Just picked up a 2005 paul turner pc 2000 340 powervalve cylinder. I was wondering if anyone knew where i could find a piston rather than going through duncan. Does anyone know who manufactures their pistons? I was also wondering if it is necessary to run an aftermarket ignition...
  8. Trx250r project wanted please help

    Wanted
    Hey guys I'm looking to buy a trx250r project totally stripped down from 1986-1989. I would prefer that all the parts come with the atv because I am trying to rebuild one this summer, but if missing some parts its okay. If you have one disassembled or somewhat together, please either email me or...
  9. Hundreds of trx250r products added to our website!!!

    PROJECT250R.COM
    Hey guys we have been adding hundreds of products to our website! You can now "shop by fitment" by selecting make/model/year All products will be discounted and we will also be working on a trx250r.net promo code for additional discounts and free shipping * You can view trx250r products...
  10. 370 motor price?

    Engine and Transmission
    I was just currious as to how much a brand new ESR 370 motor built from ESR with zero hours and comes with a CR ignition, TMXX Alky Carb and Fuel pump would go for? Max Price, Average Price, Steal Price?
  11. "New" 1988 Honda TRX 250R

    Photo & Video
    "NEW" 1988 Honda TRX 250R Hey everybody! So I am new to this site and decided that I should probably join now that I'm back in the "game" The other day I was able to pick up a 1988 Honda Fourtrax 250R from another member of this site and 3wheelerworld. The quad is very very clean and all...
  12. 1988 Honda TRX250R 250R Super Fast - 62 HP! Super Clean Fully Built ESR Monster!

    For Sale
    Selling my baby, she's up on ebay as we speak. Just thought it might interest someone here... 1988 Honda TRX250R 250R Super Fast - 62 HP! Super Clean Fully Built ESR Monster in ATVs | eBay Motors
  13. 1986 TRX250r With a 310kit HELP! PLEASE!

    Lounge
    When i got to the dunes i ran my quad and it wouldn't idle without giving it gas. While i was riding around the dunes my quad would bog at random times. You would be in 3rd gear on the power band, then all of the sudden it would start bogging. After about an hour of riding, my quad started to...
  14. 1986 TRX250r with a 310kit

    Engine and Transmission
    When i got to the dunes i ran my quad and it wouldn't idle without giving it gas. While i was riding around the dunes my quad would bog at random times. You would be in 3rd gear on the power band, then all of the sudden it would start bogging. After about an hour of riding, my quad started to...
  15. transmission issues! (trx250r 87)

    Lounge
    hey guys, i am having difficulty putting the trx250r crankcases back together. When assembling the cases the transmission, the crankshaft and all the components seem to be working and spinning perfectly. But once i start to press the cases together, the countershaft no longer spins. I...
Top