Roll Design Aarms
Results 1 to 3 of 3
  1. #1
    Member desertracer's Avatar
    Join Date
    Jul 2012
    Location
    San Diego,Ca
    Posts
    54

    Roll Design Aarms

    Hi Guys im doing a Build will 400ex XC Arms work on my 250r Build pros cons does is it prone any geometry issues if yes what are they Thanks and what length shocks work

  2. #2
    Senior Member american opel's Avatar
    Join Date
    Sep 2012
    Location
    ashtabula ohio
    Posts
    3,915
    they will bolt right up you will just need some spacers due to teh 400ex a arms mounts are alittle narrower than 250r's

  3. #3
    Senior Member Burns350R's Avatar
    Join Date
    Apr 2009
    Location
    Muscatine, IA
    Posts
    4,139
    They are usually designed for 18.75" But your best bet is to install them and pull the measurements for yourself. The measurements for optimal bump steer sometimes change based on all your components.
    (MX) TRX 363R 02- Laeger Narrow Frame/CR500 Link,Motowoz, Roll Design +4, RPM +4 axle, LED 363 +4 Stroker, 38 A/S carb,Rath Signature Series,CCP

    (XC) TRX 370R 86- Stock frame(gusseted),No link rear, JD MGC +2 Arms, Motowoz shocks, RPM XC Axle, LED 370, 38 A/S carb, Rath Signature Series


 

Remove Ads

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •