Low Compression - Page 2
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21
Like Tree2Likes

Thread: Low Compression

  1. #11
    Senior Member SandSlinger's Avatar
    Join Date
    May 2018
    Posts
    228
    Its just a basic bore job. 4stroke only shops can do it or 2stroke only, or competent machine shops. Now if he did want porting then yes totally send it out to bdt, LED, Bubba etc..

  2. #12
    Junior Member mzunno2's Avatar
    Join Date
    Dec 2018
    Location
    Long Island NY
    Posts
    12
    Quote Originally Posted by acecarlos View Post
    Absolutely correct...!



    Please don't just send it to any machine shop or shop that does not work on 2 strokes, specifically Honda 250R's....you won't get the 'Best' work for your cylinder. Lot's of good 2 stroke 250R shops around, you have a lot of options, if interested in BDT here is BDT contact information:

    BDT Motorsports
    8760 Helms Ave
    Rancho Cucamonga, CA 91730
    909-466-9152
    USA

    Carlos
    ok great thanks Carlos and American Opel. I will do some digging into who is in my area on the east coast. if no luck I will inquire with BDT.
    Thanks again guys. super helpful !! sorry for the noob questions
    Last edited by mzunno2; 01-29-2019 at 02:25 PM.
    american opel likes this.

  3. #13
    Junior Member mzunno2's Avatar
    Join Date
    Dec 2018
    Location
    Long Island NY
    Posts
    12
    Ok, great good to know. Thanks sandslinger. I guess once I pull the cylinder it will determine if I am porting and boring or just getting a new cylinder, In that case I will be searching for an OEM one !

  4. Remove Advertisements
    TRX250R.net
    Advertisements
     

  5. #14
    Senior Member SandSlinger's Avatar
    Join Date
    May 2018
    Posts
    228
    There's a guy in your area I just know him off bansheehq his name is Carl, and he builds quick shees, but he also works on 250rs as well. BigMike on here knows who I am talking about and could probably give you the info. Itd save you shipping and he has a good Rep. If that dont work out yes Carlos at BDT in Cali could get yah set up no problem.

  6. #15
    Senior Member Action69's Avatar
    Join Date
    Feb 2016
    Posts
    251
    Welcome I’m in nyc as well,I had a good mechanic in a local Honda shop (20yrs at same dealer)but he recently left,he’s from out east I can hit him up on his cell and see where he’s working these days.where do you plan on riding? Calverton ?Big mike on here is from LI maybe he can recommend someone out east..pm him.

  7. #16
    Super Moderator C-Leigh Racing's Avatar
    Join Date
    Dec 2007
    Location
    Nashville NC
    Posts
    4,272
    I'll second the motion, on finding a bore shop that only does small engines, mostly 2 strokes. Because they know the 2 stroke engines & how important it is to have a good straight bore with the proper piston to bore clearance.
    Years ago, I use to hop around from one automotive machine shop to another to get my cylinder boring done, but it cost me enough one season to make me change my way of thinking. When it all came to a head, it cost me two class championships for the season, from poor bore jobs from workers that would rather set up 4 holes at a time, sit back & watch the machine work, than doing one each time. Lesson learned, so now I have the best two stroke cylinder bore man I have ever used & until something happens to him, his shop is the only one I'll use.
    Having a bore shop close to you, can be important also, so you can keep an eye on things. Not that shipping it out for a bore & fit is out of the question though, because theres plenty of places to ship out to that can do a quality bore & fit.
    Neil
    Last edited by C-Leigh Racing; 01-30-2019 at 10:39 AM.

  8. #17
    Junior Member mzunno2's Avatar
    Join Date
    Dec 2018
    Location
    Long Island NY
    Posts
    12
    Sounds good., I am going to try to get in contact with Bigmike and see if he can give me Carls information. Obviously id like to stay on the island, cut the cost and hassle of shipping.
    Most of my riding is upstate Ny and Calverton yes, - nothing serious or competitive.
    How can I get in touch with bigmike? somewhat new to the site...

    thanks a ton guys super helpful!

  9. #18
    Senior Member SandSlinger's Avatar
    Join Date
    May 2018
    Posts
    228
    If a guy like Neil says skip the machine shop route then I stand corrected. I had great luck and my dad did to, but Neil is really knowledgeable. If big mike on here don't hit yah up I can pm you some on Carl.
    american opel likes this.

  10. #19
    Senior Member Action69's Avatar
    Join Date
    Feb 2016
    Posts
    251
    Big mike is on here pretty frequently,you can pm him .If your unsure how to do that just click on his name then there is a private message option.

  11. #20
    Senior Member american opel's Avatar
    Join Date
    Sep 2012
    Location
    ashtabula ohio
    Posts
    3,915
    all you have to do is go on bdt's site and call or just send..you can also pm carlos.
    Quote Originally Posted by mzunno2 View Post
    Sounds good., I am going to try to get in contact with Bigmike and see if he can give me Carls information. Obviously id like to stay on the island, cut the cost and hassle of shipping.
    Most of my riding is upstate Ny and Calverton yes, - nothing serious or competitive.
    How can I get in touch with bigmike? somewhat new to the site...

    thanks a ton guys super helpful!


 
Page 2 of 3 FirstFirst 123 LastLast

Remove Ads

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

trx250r compression?low

Click on a term to search for related topics.