Post pics of your R duners - Page 2
Page 2 of 18 FirstFirst 123412 ... LastLast
Results 11 to 20 of 178
Like Tree48Likes

Thread: Post pics of your R duners

  1. #11
    Senior Member thedeatons's Avatar
    Join Date
    Nov 2008
    Posts
    810
    I don't drag either, I like to turn and always ran Sand Stars on my Dales.... I just figured I may need the extra oomph the Haulers could give me.... we'll see in about a month.
    1995 Titled Laeger Narrow Pro-Trax w/ 1991 CR500 Linkage / All Stainless Hardware / Custom Axis Shocks / LSR Axle / Baldwin Anit-Fade / 265CC Mildly Ported National / Port Matched V-Force3 Reed Cage / 39mm PWK / No-Toil Air Filter / Custom Filter Bracket / ESR CR250 Ignition / Sparks MX Pipe / ESR Silencer / IMS 4G Tank Line-X'd / AC Bumper, Grab Bar, Pro-Peg Nerfs, Skidplate / Tag Metals Clamp / Tag T2 Cannondale Bend Bars (Sandblasted) / TRX450R Front Brake Master / ODI Lock On Grips / 300EX Throttle

  2. #12
    Senior Member Pest's Avatar
    Join Date
    Jan 2008
    Posts
    100
    Pest, what pipe is that?
    CPI High rev cut down 4"
    2003 LSR 349PV

    2006 long travel busket

  3. #13
    Senior Member Pest's Avatar
    Join Date
    Jan 2008
    Posts
    100
    Surprised to see most of you guys running v-cut paddles. I figured I would have to run straight cuts to keep up with my 450 riding friends....
    I don't run the skates pictured, to squirly for me. I run 7 paddle haulers
    2003 LSR 349PV

    2006 long travel busket

  4. Remove Advertisements
    TRX250R.net
    Advertisements
     

  5. #14
    Senior Member Michael88R's Avatar
    Join Date
    Dec 2007
    Location
    Tulare, Ca
    Posts
    2,039
    I don't run the skates pictured, to squirly for me. I run 7 paddle haulers

    How do you like the turning, handling, and overall performance on the 7 paddle haulers? What size tire and wheel are you running?
    88 TRX250R, ESR 330PV with TRX7 porting, ESR TRX5 std. mount pipe, CR reeds with 38mm Mikuni TMX, Roll Lobo II front end, OEM swingarm, Motowoz front shocks, Elka rear shock, PRECISION Stabilizer, Lsr axle.

    06 TRX450ER, Duncan 470 national kit, Roll Design A-arms, Motowoz shocks front and rear, Houser XC rear linkage, CCP stabilizer, IMS-Roll Pegs and heal guards, Rpm axle.

  6. #15
    Senior Member Pest's Avatar
    Join Date
    Jan 2008
    Posts
    100
    How do you like the turning, handling, and overall performance on the 7 paddle haulers? What size tire and wheel are you running?
    20x10x10 Haulers, turns fine. I love the 7 paddle, Iv'e had 8 and 10 paddle haulers and these seem to fit me best. Still bites hard at launch but doesn't bog me down in the higher gears.
    2003 LSR 349PV

    2006 long travel busket

  7. #16
    Senior Member Michael88R's Avatar
    Join Date
    Dec 2007
    Location
    Tulare, Ca
    Posts
    2,039
    20x10x10 Haulers, turns fine. I love the 7 paddle, Iv'e had 8 and 10 paddle haulers and these seem to fit me best. Still bites hard at launch but doesn't bog me down in the higher gears.

    Everyone thinks more paddles is better, but that's not always the case. I've got some 20x10x8 7 paddle edges, but haven't had time to try them yet.
    88 TRX250R, ESR 330PV with TRX7 porting, ESR TRX5 std. mount pipe, CR reeds with 38mm Mikuni TMX, Roll Lobo II front end, OEM swingarm, Motowoz front shocks, Elka rear shock, PRECISION Stabilizer, Lsr axle.

    06 TRX450ER, Duncan 470 national kit, Roll Design A-arms, Motowoz shocks front and rear, Houser XC rear linkage, CCP stabilizer, IMS-Roll Pegs and heal guards, Rpm axle.

  8. #17
    Senior Member thedeatons's Avatar
    Join Date
    Nov 2008
    Posts
    810
    I really want to try the Skat Trak Edges compared to Sand Stars.... What wheels are they on? Any chance you can get the weight of the rear wheel/tire combo, on a bathroom scale?
    1995 Titled Laeger Narrow Pro-Trax w/ 1991 CR500 Linkage / All Stainless Hardware / Custom Axis Shocks / LSR Axle / Baldwin Anit-Fade / 265CC Mildly Ported National / Port Matched V-Force3 Reed Cage / 39mm PWK / No-Toil Air Filter / Custom Filter Bracket / ESR CR250 Ignition / Sparks MX Pipe / ESR Silencer / IMS 4G Tank Line-X'd / AC Bumper, Grab Bar, Pro-Peg Nerfs, Skidplate / Tag Metals Clamp / Tag T2 Cannondale Bend Bars (Sandblasted) / TRX450R Front Brake Master / ODI Lock On Grips / 300EX Throttle

  9. #18
    Senior Member Michael88R's Avatar
    Join Date
    Dec 2007
    Location
    Tulare, Ca
    Posts
    2,039
    I have them mounted on some super heavy beadlocks, but I weighed the tire before I mounted them. Its written down somewhere. I'll have to look for it.
    88 TRX250R, ESR 330PV with TRX7 porting, ESR TRX5 std. mount pipe, CR reeds with 38mm Mikuni TMX, Roll Lobo II front end, OEM swingarm, Motowoz front shocks, Elka rear shock, PRECISION Stabilizer, Lsr axle.

    06 TRX450ER, Duncan 470 national kit, Roll Design A-arms, Motowoz shocks front and rear, Houser XC rear linkage, CCP stabilizer, IMS-Roll Pegs and heal guards, Rpm axle.

  10. #19
    Senior Member Michael88R's Avatar
    Join Date
    Dec 2007
    Location
    Tulare, Ca
    Posts
    2,039
    I really want to try the Skat Trak Edges compared to Sand Stars.... What wheels are they on? Any chance you can get the weight of the rear wheel/tire combo, on a bathroom scale?

    Alright, I found my notes on the tire weights.

    Skat trake edge 20x10x8 7 paddle, tire only 9.5 lbs.
    Sand Skate II 20x11x10, tire only approx. 10.5 lbs.

    The SSII on a .125 10x9 wheel was approx. 15 lbs.
    The Edge on a 8x8 beadlock was approx. 15.5 lbs.

    The beadlocks are way heavy, but I had them just sitting around and they are easier to mount and dismount. Plus they look sick! I buffed off all of the bolts and painted the rings satin black.
    88 TRX250R, ESR 330PV with TRX7 porting, ESR TRX5 std. mount pipe, CR reeds with 38mm Mikuni TMX, Roll Lobo II front end, OEM swingarm, Motowoz front shocks, Elka rear shock, PRECISION Stabilizer, Lsr axle.

    06 TRX450ER, Duncan 470 national kit, Roll Design A-arms, Motowoz shocks front and rear, Houser XC rear linkage, CCP stabilizer, IMS-Roll Pegs and heal guards, Rpm axle.

  11. #20
    Senior Member 312R1's Avatar
    Join Date
    Dec 2007
    Location
    Port Matilda Pa
    Posts
    1,257
    Here is some pics of mine.

    What happened to the Arens frame?
    Laeger Pro-Trax CR500 link 250R

    08 Sponsers
    BVC Racing
    Clegg's Innovations
    Duncan Racing
    Galfer
    McCoy Motorsports
    Mrcycles


 
Page 2 of 18 FirstFirst 123412 ... LastLast

Remove Ads

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

250r trx11

,
300ex front brake lines
,

cpi cr500 race pipe

,
cpi custom pipe cr500 trx250r
,
ct 350 powervalve
,

esr 370 drage

,

esr 370 with keihin 40.5 carb kits

,
honda trx 250r trx11
,
laegers cr500 trike
,
puma trx250r
,
quadtech 250r seat
,
tmx pro quad
,
trx250r black
,

trx250r seat cover

,
trx250r white with carbon hood
Click on a term to search for related topics.