any one know what plastics these are?
Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Member evaneyeball's Avatar
    Join Date
    Jan 2020
    Posts
    42

    any one know what plastics these are?

    Click image for larger version. 

Name:	IMG_0028.JPG 
Views:	18 
Size:	2.08 MB 
ID:	61983i thank fully have changed the seat cover since this picture. but does anyone know if these are just hacked up OEM plastics or aftermarket. the hood is blue with a carbon fiber tape on it.

  2. #2
    Member scrappy's Avatar
    Join Date
    Dec 2019
    Location
    2.5hrs East of the Oregon dunes
    Posts
    63
    Looks like cut 88 oem plastic & an oem 86-87 hood. One thing that looks off though is the lack of openings in the bottom of the scallops on the sides of the front fenders but that might just be the angle of the pic making them look closed in.

  3. #3
    Member evaneyeball's Avatar
    Join Date
    Jan 2020
    Posts
    42
    i can take pictures tomorrow because i thought the same thing but the cut looks to either professionaly cut or just molded that way. but they need replaced anyhow but i was just wondering

  4. Remove Advertisements
    TRX250R.net
    Advertisements
     

  5. #4
    Member scrappy's Avatar
    Join Date
    Dec 2019
    Location
    2.5hrs East of the Oregon dunes
    Posts
    63
    If it's not a real long drive for you these look like they might be worth checking out if your in need of fenders: https://corvallis.craigslist.org/mpo...067346779.html

  6. #5
    Member evaneyeball's Avatar
    Join Date
    Jan 2020
    Posts
    42
    yeah ive seen those before and theyre not that bad of a drive but i just dont have the 600 bucks to buy them because of a 1500 dollar engine rebuild. and im also hoping to find a pair of fullbores. for chep once the rebuild is done and im in the position to buy them. but thank you for looking. but i will take more pictures once i get home. because i like the look of them and if they are made that way then i would like to be able to find another pair some day.

  7. #6
    Senior Member acecarlos's Avatar
    Join Date
    May 2010
    Location
    Alta Loma, California
    Posts
    12,607
    Quote Originally Posted by evaneyeball View Post
    yeah ive seen those before and theyre not that bad of a drive but i just dont have the 600 bucks to buy them because of a 1500 dollar engine rebuild. and im also hoping to find a pair of fullbores. for chep once the rebuild is done and im in the position to buy them. but thank you for looking. but i will take more pictures once i get home. because i like the look of them and if they are made that way then i would like to be able to find another pair some day.
    "because of a 1500 engine rebuild"...according to your own post "is only doing the bore and putting the motor together"...that's it, really?

    $1500 (IMO) is an outrageously high price for just a bore & putting a 250R together; then again I don't ride in Oregon and wouldn't know. LOL

    Carlos

  8. #7
    Member evaneyeball's Avatar
    Join Date
    Jan 2020
    Posts
    42
    its LED doing it and its boring the cylinder new piston, new crank, all new bearings, a complete hinson cr125 clutch, a entire gasket kit, and repairing the cases. and possibly reeds, race gas, and exhaust. and then putting it back together. i just summarized it by saying boring and putting it all back to gether. but sorry should have specified that i was putting a lot of new parts in it. but then again is it your job to tell every one that they are dumb idiots for making it simpler and shorter. because who in their right ming would pay someone 1500 just to do 180 dollar of work.
    Last edited by evaneyeball; 02-11-2020 at 07:52 PM.

  9. #8
    Senior Member matuus's Avatar
    Join Date
    Jun 2014
    Location
    SoCal
    Posts
    238
    more than bore n together. lol


    i have the best. bdt built engines.
    bdt261 oem
    bdt363 prox
    bdt431 puma
    bdt561 saber
    Sent from my iPhone using Tapatalk

  10. #9
    Member scrappy's Avatar
    Join Date
    Dec 2019
    Location
    2.5hrs East of the Oregon dunes
    Posts
    63
    Looking at the pic of your plastic again I just realized I saw your R on Craigslist not to long ago. Seems like the guy selling it had 2 R's for sale. Did he still have the other one when you got yours?

  11. #10
    Member evaneyeball's Avatar
    Join Date
    Jan 2020
    Posts
    42
    Quote Originally Posted by scrappy View Post
    Looking at the pic of your plastic again I just realized I saw your R on Craigslist not to long ago. Seems like the guy selling it had 2 R's for sale. Did he still have the other one when you got yours?
    he had a banshee and then this one. but he was charging an insane amount for the banshee. and after meeting him even if you thought the banshee was a good deal after meeting him you wouldent think so. he didnt know anything about them. he didnt even know what ct was or what bore was on the 250 but he was charging 2200 originally and we just said 1500 he didnt even think about it and he agreed to selling it to us for 1500 dollars. but i didnt know about him having another 250r. when i bought it there was another 250r more up by mt.hood that was a flat tracker that didnt run and it waas something about the cdi box and he wanted like 2100 dollars for it. but i just took some more pictures and just waiting for my stupid iphone4 to send them to my computer


 
Page 1 of 2 12 LastLast

Remove Ads

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •