New bdt billet footpegs for atc250r 85-86 & trx250r 86-89
NEW BDT Billet Pegs for ATC250R 85-86 and TRX250R 86-89. Available in Anodized Red, Blue, Black and Natural Billet. They come with 3 sets of Stainless Steel (SS) cleats (#1-5/16” installed) and 50 additional cleats of each #2-3/8”& #3-7/16” that are fully adjustable allowing Boot Camber to be varied from Front, Middle or Back.
You can also adjust cleat heights to increase or decrease boot engagement or aggressiveness to pegs. A BDT Safety Feature is the Full Radius Nose or FootPeg end, Unlike Steel Pegs with Sharp end corners that can dig into your boot or leg in the event of a fall.
They are 1.6 lbs per set lighter than similar aftermarket Steel FootPegs, 22% wider, 1/2” longer,
and available in standard Stock Height and Lowered -5/8” & Set Back -1” for TT or Flat Track. Made from the finest Aluminum Aircraft Grade 7075-T6, they are equally Strong to any current aftermarket Steel Pegs.
The BDT Billet Pegs come with all mounting bolts, 3 sets of Cleats, 2 Allen Wrenches, Loctite and full instructions.
100% MADE IN THE USA
Additionally BDT Billet Pegs will also be available for First Generation 81-84 ATC250R, and all 2 & 4 Stroke Quads in the very near future.
BDT is very proud to bring to the 250R community the Finest FootPeg sets available . “Simply The Best”....!