Works shock bushings

[rk8303]

I need the bushings to fit the lower part of a works steeler shock to a 250r a arm. Let me know if you have anything. Thanks

[gojk]

You can call works directly to get these parts. Maybe you can get lucky and someone here will have them, but if you run out of luck just call Works and ask for the parts department. They were very helpful and shipped out the parts fast.

[C-Leigh Racing]

Heres a cheap trick.
Take the shock & inner metal bushing with you, go to Lowes or Home Depot & check out the clear hose they have in different sizes & thicknesses, find the right size & have as much as you want cut off the roll. Once you get back home, just measure how wide the little piece of hose needs to be & cut.
Walla, brand new rubber shock eye bushings, & if you cut them just a hair longer than needed with a washer on each side, the hose sticking out will act like a seal to keep junk from getting in between the bushing & rubber.
Neil

[eatsleep250r]

[QUOTE=rk8303;93217]I need the bushings to fit the lower part of a works steeler shock to a 250r a arm. Let me know if you have anything. Thanks[/iQUOTE]
if im not mistaken i may have these i sold my shocks to a guy in they may have fallen out

[eatsleep250r]

ill post pics of the bushings i have or found and have no clue from what

[rk8303]

Thank you.

[rk8303]

Got the bushings, thanks guys.