Ok thanks for the good advice and yes it
Is a regular pipe not a center mount And i also
Use my phone for the site
Ok thanks for the good advice and yes it
Is a regular pipe not a center mount And i also
Use my phone for the site
I've had 2 different carriers from 2 different companies and one was always a little loose fitting, while the other was borderline to tight fitting. I never had any problems with either one moving though and this is on the 86-87 style swingarm too. If nothing else why not get the allen wrench socket to put into a ratchet for extra torque when tightening it. Is it the stock or aftermarket carrier?
I bet your chain is the issue not the carrier loosening up. I replcaed my chain recently because my last chain was toast and kept stretching and loosening.
86 trx310R
Pro-Fab air box eliminator with K&N filter
ESR Keihin 40.5 mm carb
V-Force 3 carbon fiber reeds
ESR 310 ported by Neil
ESR TRX5 pipe and silencer
Pro-Fab antivibe steering stem
Lonestar anti vibe clamp
Pro-Fab pegs
Tag Alius bars, fly billet kill switch
Billet red kicker, mag cover, brake pedal, water pump, & temp gauge
Works tripple rate front shocks
14/39 gearing
FWCarbon hood, rad shrouds, & gas tank cover
Nstyle all gripper seat cover (black)
Silver full bore plastics
Duner!