ESR 310. Need long (BIG BORE) studs

[june]

Anyone have any?

[Victork]

What do you mean big bore studs? My esr 310 slid over the 4 Oem base studs.

[morse250r]

I can get the part number 2morow. They are 1.50 from honda

[june]

What do you mean big bore studs? My esr 310 slid over the 4 Oem base studs.

Maybe its a 330 then. I'm not sure cause I've never dealt with aftermarket cylinders but the oem studs aren't long enough. The nuts are barely on the stud threads.

[june]

I can get the part number 2morow. They are 1.50 from honda

Ok thanks. I think BDT has some on ebay but it only shows Carlos has 3 of them.

[morse250r]

Part number 9200-100553b. You need these studs when you run spacer plates

[june]

Part number 9200-100553b. You need these studs when you run spacer plates

Got it thanks!

[acecarlos]

Ok thanks. I think BDT has some on ebay but it only shows Carlos has 3 of them.

Add a couple of zeros to that 3 like 300, we have a ton of Honda OEM studs...eBay quantity is way off, we need to fix that. Call the shop if you still need them.

Carlos.

[june]

Add a couple of zeros to that 3 like 300, we have a ton of Honda OEM studs...eBay quantity is way off, we need to fix that. Call the shop if you still need them.

Carlos.

Ok gotcha! Thnks!

[snowmaker10]

BDT has them as I bought them for my spacer plate motor. Believe they are cr250 studs.